Common Water Contaminants and How the Purely P1 Removes Them

Water treatment plants in North America do a good job of disinfecting and preparing water for distribution. The main issue lies in the journey water makes after leaving the facility. As it travels through miles of aging, reactive infrastructure, it can pick up sediments, metals, organic compounds, and trace contaminants before it finally reaches your faucet. This is why a properly engineered under sink water filter or point-of-use water filter becomes essential for tap water purification at home.

‍

Purely’s P1 under-sink system was designed specifically for modern water challenges. Using a four-stage approach PP5UM sediment filtration, Activated Carbon Fiber (ACF), Filtersorb SP3, and KDF55 the P1 tackles the broad spectrum of contaminants most commonly found in North American tap water today. Its advanced filtration technology delivers reliable contaminant removal without changing water pressure or taste.

Below, we break down the main contaminants found in tap water, how they get into your water, and exactly how each stage of the P1 removes or treats them.

‍

1. Chlorine & Chloramine

Why they're so common

Municipalities add chlorine or chloramine as disinfectants. They’re effective at killing microbes and bacteria, but they create side effects:

• Chemical smell or taste

• Formation of disinfection byproducts (THMs)

• Accelerated wear on plumbing components

Most people notice chlorine immediately the “pool-water” smell and taste.

How the Purely P1 removes them

Stage 2 – Activated Carbon Fiber (ACF)

ACF’s ultra-fine fibers create a massive surface area. This makes it an excellent chlorine removal filter for homes that want cleaner, better-tasting water.

ACF gives chlorine and chloramine thousands of contact points as water passes through. As a result, they’re adsorbed quickly and consistently, even at higher flow rates.

‍

Stage 4 – KDF55 Redox Media

KDF stabilizes chlorine and helps reduce remaining disinfectants. It also prevents bacterial growth inside the filter housing.

The combination of ACF + KDF is highly effective at removing chlorine and chloramine in a drinking water filter.

‍

2. Lead & Other Heavy Metals

Why they appear in tap water

Most heavy metals don’t come from water plants they come from pipes and plumbing inside cities and buildings. Lead service lines, old solder, brass fixtures, and corroding infrastructure all contribute.

Exposure to metals like lead, mercury, cadmium, and chromium can affect cognition, cardiovascular systems, and long-term cellular health.

‍

How the Purely P1 removes heavy metals

Stage 4 – KDF55 Redox Media

This is the P1’s heavy metal removal water filter component. KDF works through a controlled redox reaction:

• Converts dissolved metals into insoluble, non-absorbable forms

• Binds and captures many heavy-metal ions

• Reduces lead, mercury, arsenic species, copper, and more

The result is cleaner, safer water with meaningful protection from the heavy metals commonly found in municipal and household plumbing.

‍

3. Sediment, Rust, Pipe Scale & Physical Particles

Where they come from

Sediment is one of the most overlooked contaminants in tap water. It includes:

• Rust flakes from aging pipes

• Sand and silt

• Pipe scale

• Dirt and physical debris

• Microplastics

These particles aren’t always visible, but they affect taste, clarity, and long-term plumbing health.

‍

How the Purely P1 removes them

Stage 1 – 5-Micron Polypropylene Sediment Filter (PP5UM)

This first stage captures:

• Rust

• Sand

• Silt

• Dirt

• Microplastics

• Larger organic particles

By removing these upfront, the PP5UM filter protects the next stages and keeps flow rate consistent.

‍

Stage 2 – ACF

Adds additional micro-particle polishing, removing the smaller organic and synthetic particles the PP5UM filter doesn’t catch. This contributes to a highly effective tap water purification process.

Together, they deliver visibly cleaner, crystal-clear water.

‍

4. Volatile Organic Compounds (VOCs)

What they are

VOCs are industrial chemicals and solvents found in:

• Paints

• Plastics

• Gasoline

• Cleaning agents

• Manufacturing runoff

Municipal plants are not designed to remove many VOCs.

‍

How the Purely P1 removes them

Stage 2 – Activated Carbon Fiber (ACF)

ACF’s microscopic fiber matrix adsorbs:

• Benzene

• Toluene

• Chloroform

• Industrial solvents

• Chemical residues

Its ultra-fine fiber structure provides exceptional contact time for VOC reduction, making it a high-performance home water purification component.

‍

5. PFAS (“Forever Chemicals”)

Why PFAS are a growing concern

PFAS come from:

• Non-stick cookware

• Waterproof coatings

• Food packaging

• Firefighting foams

• Industrial discharge

They persist in the environment and resist breakdown.

PFAS exposure has been linked to immune disruption, hormonal effects, fertility concerns, and increased cancer risk.

‍

How the Purely P1 targets PFAS

Stage 2 – ACF

ACF’s high-surface-area fibers attract PFAS molecules through adsorption and electrostatic interaction — a key advantage when selecting a premium water filter for modern contaminants.

‍

6. Trihalomethanes (THMs)

Why they form

THMs form when chlorine reacts with organic matter in the water supply. Long-term exposure may affect cellular health, liver function, and reproductive systems.

How the Purely P1 reduces them

Stage 2 – ACF

Adsorbs THM molecules quickly due to its high surface area and improves taste and odor.

Stage 4 – KDF55

Helps stabilize chlorine to limit further byproduct formation.

Together, these stages support reliable THM reduction in a point-of-use water filter.

‍

7. Herbicides & Pesticides

How they enter water

Agricultural regions experience runoff containing:

• Atrazine

• Glyphosate

• Simazine

• Other crop treatments

Even in cities, trace agricultural chemicals can reach drinking water.

‍

How the P1 removes them

Stage 2 – ACF

Organic pesticide molecules are naturally attracted to ACF’s fiber structure, making it effective for contaminant removal.

‍

8. Pharmaceuticals & Hormone-Disrupting Compounds

Why they appear in tap water

Medication residues enter water systems through wastewater pathways that treatment plants can’t fully eliminate.

How the Purely P1 reduces them

Stage 2 – ACF

Its adsorption characteristics allow it to capture many pharmaceutical molecules and endocrine disruptors, strengthening the system’s role as a dependable drinking water filter.

‍

9. Hard Water Minerals, Scale & Limescale Buildup

Calcium and magnesium minerals cause:

• Limescale

• Film on fixtures

• Reduced appliance lifespan

• Clogged aerators

Traditional filters either remove minerals entirely or don’t address scaling.

‍

How Purely treats minerals without removing them

Stage 3 – Filtersorb SP3 (NAC Technology)

Instead of removing minerals, NAC transforms them into stable crystals.

This process:

• Prevents limescale

• Protects plumbing

• Keeps healthy minerals

• Preserves fresh taste

It acts as an effective alternative to a traditional home water softener, without stripping minerals from the water.

‍

10. Taste, Odor & Aesthetic Issues

Where these issues come from

• Chlorine

• Organic matter

• Old pipes

• Hydrogen sulfide

• Biofilms

• Seasonal water changes

‍

How the P1 fixes taste and odor

Every stage contributes:

• PP5UM removes debris

• ACF eliminates chlorine and musty flavors

• SP3 stabilizes minerals

• KDF55 prevents internal bacterial growth

The result is consistently clean, crisp, refreshing water the goal of every home water filtration system.

How the Four Stages Work Together

‍

Stage 1 — PP5 Micron Sediment Filter

Captures physical contaminants like rust, sand, dirt, and microplastics.

Stage 2 — Activated Carbon Fiber (ACF)

Removes chlorine, VOCs, PFAS, pesticides, pharmaceuticals, THMs, and more.

Stage 3 — Filtersorb SP3 (NAC)

Prevents scaling while preserving healthy minerals.

Stage 4 — KDF55

Reduces heavy metals, stabilizes chlorine, and prevents bacterial growth.

Together, these create a balanced, efficient water purification system for modern homes.

‍

Final Thoughts

Clean water isn’t just about removing one or two contaminants — it’s about addressing the full spectrum of modern water challenges. The Purely P1 was built for exactly that. With its four-stage architecture, it removes physical particles, adsorbs chemicals, stabilizes minerals, and targets heavy metals in a single, compact under-sink water filter.

The result is simple: safer water, cleaner taste, healthier living, and peace of mind for your home.

‍